!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> Sage Parts | Bellycool Pre-Conditioned Air Ducting

Pre-Conditioned Air Ducting

specials AC Unit Belt Loader Parts Baggage Tractor Parts Belt Loader Parts Cargo Loader Parts Cart, Dolly, & Trailer Parts Lavatory Unit Parts Push Back Tractor Parts

RAMPTECH® BellyCool Ducting

BWD Logo

pdf download
Product Sheet  

Keep your cool.

Finally, it's cool to be in the baggage hold...Now baggage handlers can feel cool and stay cool even in extreme heat conditions. Introducing RAMPTECH® BellyCool. BellyCool is a special section of ducting designed to divert some air from the PCA unit and direct it into the baggage hold. BellyCool is easy to install and even easier to use.

Beat the heat, no matter how hot.

Compared to the ambient ramp temperature, the temperature inside the baggage hold is much warmer. On a hot day, the temperature rise in the baggage hold can be unbearable. RAMPTECH® BellyCool ducting delivers a regulated amount of Pre-Conditioned Air to the baggage hold by utilizing a small amount of air from the PCA delivery system. Not to worry, the amount of air diverted for this purpose does not impact the aircraft cooling process in any measurable way. In fact, the use of BellyCool has less impact on internal aircraft temperature than a single kink in the delivery duct.

How does it work?

A 4.5 inch (114 mm) wire reinforced duct is attached to the main supply line via an access point near the reducer. This connection utilizes a closable Velcro® joint. When closed, it is used like a standard reducer. The reducer and access port are located at the end of an 8 inch (203 mm) FlexLink. The length of FlexLink can vary to meet specific operational needs. The purpose of the FlexLink is to bring the reducer and BellyCool port to the ground, where the connection is easier to work with, eliminating the extra load that is lifted to the aircraft connection port.

A cool unit, is a complete unit.

The BellyCool unit will consist of two or three parts: a reducer, a length of PCA ducting, and an optional piece of FlexLink. Below, you will see available sets and parts, including a recommended adaptor and some alternate PCA length options. Call Sage for any lengths or parts not shown here.


REDUCER, 12 INCH - 8 INCH, 14 INCH - 8 INCH WITH RAMPTECH BELLYCOOL DUCTING

SAGE PART NUMBER

BLC1408REDVC4

BLC1408REDVC6

BLC1208REDVC4

BLC1208REDVC6

DESCRIPTION

REDUCER, 14-8 BELLYCOOL WITH 4 FOOT FLEXLINK, VELCRO INLET, SOFT CUFF OUTLET

REDUCER, 14-8 BELLYCOOL WITH 6 FOOT FLEXLINK, VELCRO INLET, SOFT CUFF OUTLET

REDUCER, 12-8 BELLYCOOL WITH 4 FOOT FLEXLINK, VELCRO INLET, SOFT CUFF OUTLET

REDUCER, 12-8 BELLYCOOL WITH 6 FOOT FLEXLINK, VELCRO INLET, SOFT CUFF OUTLET

4-1/2 INCH DUCTING

SAGE PART NUMBER

BLC0430FVC

BLC0430MVC

BLC0430MVMV

BLC0450MVC

BLC0460MVC

DESCRIPTION

DUCT, 4-1/2 INCH X 30 FOOT BELLYCOOL EXTENSION, FEMALE VELCRO INLET, SOFT CUFF OUTLET

DUCT, 4-1/2 INCH X 30 FOOT BELLYCOOL MALE VELCRO INLET, SOFT CUFF OUTLET (used alone)

DUCT, 4-1/2 INCH X 30 FOOT BELLYCOOL, BOTH ENDS MALE VELCRO (used as lead if extension is required)

DUCT, 4-1/2 INCH X 50 FOOT BELLYCOOL, MALE VELCRO INLET, SOFT CUFF OUTLET (used alone)

DUCT, 4-1/2 INCH X 60 FOOT BELLYCOOL, MALE VELCRO INLET, SOFT CUFF OUTLET (used alone)

RAMPTECH® PCA ADAPTORS

SAGE PART NUMBER

MB828

MB828SW

DESCRIPTION

ADAPTOR, RAMPTECH PCA 8 INCH

ADAPTOR, RAMPTECH PCA 8 INCH SWIVEL

TEE, STRAIGHT THROUGH WITH BELLYCOOL PORT

SAGE PART NUMBER

BLC141404VVV

DESCRIPTION

TEE, 14 X 14 WITH 4 INCH BELLYCOOL PORT, FEMALE VELCRO INLET, MALE VELCRO OUTLET, FEMALE VELCRO BELLYCOOL OUTLET


Pair with RAMPTECH® Non-Metallic PCA Adaptors

RAMPTECH® PCA 8 to 8 Adaptor RAMPTECH® PCA 8 to 8 45° Angle Adapter RAMPTECH® PCA 8 to 8 360° Swivel Adapter RAMPTECH® PCA 8 to 8 45° Angle & 360° Swivel Adapter