Gear Grip Couplings

Sage Parts Specials

Gear Grip Flexible Shaft Couplings

The Neoprene and Urethane rubber sleeve compounds provide excellent torsional vibration dampening, absorb load pulsations and minimize drive line shock.

By-eye alignment eliminates precise measurement, minimizes assembly time and allows for "blind" assembly.

Non-corrosive metal ends and rubber compounds are not affected by moisture, dirt and abrasives. No lubrication is required. No metal to metal contact even when coupling shears.

FEATURES OF THE GEAR GRIP DESIGN

  • Neoprene and Urethane rubber sleeve compounds provide excellent torsional vibration dampening, absorb load pulsations and minimize drive line shock. The load is distributed evenly over a wide splined contact area minimizing rubber deformation and wear while providing minimum backlash and wind-up. Gear Grip couplings handle the shock, cycling loads and vibration that produce extreme wear in other style couplings.
  •  
  • By-eye alignment eliminates precise measurement, minimizes assembly time, requires no special tools and allows for "blind" assembly.
  •  
  • Non-Corrosive metal ends and rubber compounds are not affected by moisture, dirt and abrasives. No lubrication, adjustments or maintenance is required. No metal-to-metal contact even if the couplings shears.
  •  
  • Shear characteristics of the rubber sleeve can provide protection to the expensive drive train during extreme overloads, jamming or high shock. The sleeve can be sized to provide "mechanical fuse" function by shearing during overload. When the coupling fails, only the sleeve is replaced.
  •  
  • Electrical isolation. No possibility of metal-to-metal contact under severe overload, wear or coupling failure.
  •  
  • Compact, small diameter coupling with low moment of inertia.

 

6242382 1in x 30mm Please Call add to esage cart
6242381 30mm x 30mm Please Call add to esage cart